19 November 2026 • 6 min read
The Chips to Start-up (C2S) Programme is an umbrella capacity-building initiative launched by the Ministry of Electronics and Information Technology (MeitY) in 2022. The PIB document states a total outlay of ₹250 crore over five years, covering academic institutions across India. 1
For a design team, the practical offer has four parts: access to commercial EDA tools, shared fabrication of student-designed chips, FPGA boards for prototyping, and grant support for R&D projects. MeitY describes the programme as covering each entity of the electronics value chain, from manpower training to reusable IP and application-oriented systems. 1,2
The programme is for academia and R&D organisations first. Startups and MSMEs can also take part by submitting proposals under the Academia-Industry Collaborative Project, Grand Challenge, Hackathons or RFP routes for development of System, SoC or IP cores. 2
Why it matters (our view)
If you are an early chip team, shared tools and shared wafer runs can lower the cost of a first silicon attempt; check fit before building a plan around them.
Treat the programme's targets as goals, not results, and read the latest call and guidelines before you commit time to a proposal.
The PIB document says C2S targets 85,000 industry-ready professionals across undergraduate, postgraduate and doctoral levels. The split is 200 PhD scholars, 7000 M. Tech graduates specialising in VLSI or Embedded Systems, 8800 M. Tech graduates from computer, communication or electronic systems programmes with focused VLSI exposure, and 69,000 B. Tech students trained through VLSI-oriented coursework. 1
Beyond manpower, the programme aims to catalyse the incubation of 25 start-ups and enable 10 technology transfers. It also seeks to train one lakh students, generate 50 patents and support at least 2,000 focused research publications, and to provide access to SMART lab facilities. 1
The startup target is small next to the manpower target. The programme is mainly a talent and design-enablement scheme, with startup incubation as one of its goals. 1
The ChipIN Centre at C-DAC Bengaluru is described as one of India's largest facilities providing shared semiconductor design infrastructure to academic institutions and startups. It offers advanced chip design tools covering the entire design cycle, along with compute and hardware infrastructure, IP cores and technical mentorship. 1
The EDA vendors listed are Synopsys, Cadence, IBM, Siemens EDA, Ansys, Keysight Technologies, Silvaco, AMD and Renesas. The foundry access listed is SCL, IMEC and MUSE Semiconductors. The Centre is shown as serving 300+ institutions. 1
On usage, the PIB document says around 1 lakh individuals from 400 organisations, including 300 academic institutions and 95 startups, have used the shared national EDA infrastructure. That resulted in more than 175 lakh hours of tool usage. Over the past few years, 4,855 support requests have been addressed. High-performance computing access came through the PARAM Utkarsh supercomputer. 1
| Item | Figure | Source |
|---|---|---|
| Programme outlay | ₹250 crore over five years | 1 |
| Professionals targeted | 85,000 | 1 |
| Start-ups to be incubated (target) | 25 | 1 |
| Shared wafer runs held | 6, with 122 submissions from 46 institutions | 1 |
| Student chips fabricated, packaged, delivered | 56 | 1 |
| Fabrication technology at SCL Mohali | 180 nm | 1 |
| EDA tool usage | More than 175 lakh hours | 1 |
| Institutions given FPGA boards | 100 | 5 |
The ChipIN Centre collects designs from C2S institutions. Every three months, designs are grouped and sent to Semi-Conductor Laboratory (SCL) Mohali for fabrication using 180 nm technology. The Centre checks whether designs meet fabrication requirements and works with students through feedback and revisions. 1
Approved designs are combined onto a single shared wafer. SCL Mohali fabricates, packages and delivers the chips back to the students, who can then validate designs on silicon and gain exposure to post-fabrication testing. 1
So far, 6 shared wafer runs have been organised, enabling 122 chip design submissions from 46 institutions. A total of 56 student-designed chips were successfully fabricated, packaged and delivered. 1
The C2S website says 100 participating institutes have been provided with FPGA boards and associated design software tools, for projects ranging from basic digital design to AI/ML and video processing. Each institute received, among others, 6 Pynq Z2 boards, 16 Boolean Boards, 2 Urbana Boards, and 1 each of Arty A7-100T, Kria KR-260, Kria KV (Video), Pynq ZU and Zynq UltraScale+ MPSoC ZCU104. 5
Advanced boards are hosted centrally at the ChipIN Centre, C-DAC Bangalore: 1 Versal VCK5000 and 2 Alveo U55C, plus software bundles. They are meant for AI acceleration, data analytics and high-performance computing. 5
Institutions log in to the ChipIN Centre portal, select the boards they need and choose a preferred time slot. The ChipIN team confirms the slot or offers alternative dates, then provides access details. 5
Participating institutions get project funds for R&D projects, which the PIB document describes as running 2 to 5 years. Proposals are evaluated by an Evaluation Committee and, on its recommendation, considered for financial support. The second call for proposals was open to academia and R&D organisations in Category II and III only, with a last date of 15th September 2023; 103 organisations already in the programme could not submit again. 1,2
One example is IIT Kanpur with Silizium Circuits, which won a Rs 5 crore grant-in-aid project from C2S for an RF Transceiver SoC with an integrated RISC-V core for sub-GHz applications. The project duration is 3 years. IIT Kanpur is the nodal agency, and Silizium Circuits designs the RF front end and SoC and handles commercialisation. 3
The SoC is planned to be compatible with standards such as LoRa, 802.15.4 WLAN, ZigBee and WiSUN, and to house an indigenous RISC-V core powered with SHAKTI/VEGA processor. The press release dates from 8 June 2023. 3
The most useful fact for a design team is who can walk in. The PIB document counts about 400 organisations in MeitY's design initiatives: 305 academic institutions under C2S and 95 startups under the Design Linked Incentive (DLI) Scheme. It also says C2S has been used by 300 academic institutions and 95 startups through shared EDA infrastructure. If you are in a college or R&D lab, the route is through your institution's participation. If you are a startup or MSME, the C2S website points to collaborative projects, grand challenges, hackathons and RFPs. 1,2
The tool and fab access matters most for small teams that cannot afford licences. The ChipIN Centre lists nine EDA vendors and three foundry options, and SCL Mohali takes designs every three months on 180 nm technology. That suits learning, validation and IP prototyping. The PIB document says institutions are developing 500+ IP cores, ASICs and SoC designs for defence, telecom, automotive, consumer electronics and industrial uses, and have filed 75+ patents. 1
The Startup India playbook of June 2026 lists the Chips to Startup (C2S) Programme among startup-specific schemes, and the Design Linked Incentive Scheme among startup-relevant ones. Check the official scheme guidelines for current eligibility and open application windows, since the playbook notes that schemes run through time-bound calls. 4
For founders, the IIT Kanpur case shows one workable model: a startup with RFIC expertise partners with an institute that holds the grant, and the startup takes the design and commercialisation role. 3
It is an umbrella capacity-building initiative launched by MeitY in 2022 with a ₹250 crore outlay over five years, covering academic institutions across India. 1
The PIB document states a target of 85,000 industry-ready professionals, including 200 PhD scholars, 7000 and 8800 M. Tech graduates, and 69,000 B. Tech students. 1
The C2S website says startups and MSMEs can participate by submitting proposals under collaborative project, Grand Challenge, Hackathons or RFP routes. The PIB document says 95 startups have used the shared EDA infrastructure. 1,2
Designs are collected by the ChipIN Centre and sent every three months to SCL Mohali, which fabricates them using 180 nm technology, packages them and delivers them back. 1
How this page was made: written with AI from the sources above, read on 19 November 2026. Every figure was checked against the source it cites; lines under "Why it matters" are our view. Editorial standards.
Have a question about deeptech in India? Ask Kriyā: it answers from our dated sources, and the first answers are free.
Ask Kriyā