Defence Acquisition Procedure: Make-I, II, III for startups

19 November 2026 • 6 min read

In short

  • Under the Defence Acquisition Procedure, Make-I prototypes get government funding, Make-II is industry funded, and Make-III covers import substitution.

What the Make categories are under DAP 2020

The Defence Acquisition Procedure 2020 (DAP 2020) was released by the Ministry of Defence on September 30, 2020. MP-IDSA says it supersedes the Defence Procurement Procedure 2016 and runs to 12 chapters and 657 pages. It keeps the earlier architecture: classified procurement categories, a multi-stage cycle and standard contract documents. 6

The 'Make' procedure was introduced in 2006 to promote design and development of prototypes of military equipment. MP-IDSA notes that DAP 2020 splits the Make category into three sub-categories: Make-I, Make-II and Make-III. 6

In the hierarchy of categories listed by MP-IDSA, Buy (Indian-IDDM) comes first, and Make I, II and III follow it in descending order of priority. IDDM stands for Indigenously Designed, Developed and Manufactured. 6

Why it matters (our view)

Make-II is the lowest-friction entry for a deeptech startup, but it moves prototype cost and risk onto your balance sheet, so model that before you pitch.

Pair a Make-II proposal with items on the import-restriction lists, where the buyer's need is already stated.

Make-I: government-funded development

MP-IDSA describes Make-I as projects involving design and development of equipment, systems, major platforms or upgrades by industry, with government financial support. The support is up to 70 per cent of prototype development cost, reduced from 90 per cent, or a maximum of ₹250 crores per Development Agency. 6

The same brief says the upper limit may vary in individual cases. A Development Agency is the entity that takes up the prototype work. The cap and the share together mean the industry partner carries the rest of the prototype cost. 6

The Ministry of Defence's own 2021 reforms booklet lists Make-I among the steps for harnessing design and development capabilities, alongside Make-II and Innovations for Defence Excellence (iDEX). 3

Make-II: industry-funded, startup-friendly

MP-IDSA describes Make-II as projects involving design, development and innovative solutions by Indian vendors without any government funding. Solutions offered even by a single individual or a firm as a suo-moto proposal are to be progressed as a Resultant Single Vendor case. 6

Startup India says the Ministry of Defence launched Make-II with the aim of giving impetus to startups and timely induction of equipment. It states that no government funding is envisaged for prototype development, but there is assurance of orders on successful development and trials of the prototype. 1

Startup India lists industry-friendly provisions: relaxed eligibility criteria, minimal documentation, and consideration of proposals suggested suo-moto by industry. It adds that financial capping for projects with explicit startup participation is reserved and defined separately by each Defence PSU. 1

Make-III: import substitution

MP-IDSA describes Make-III as covering products not designed or developed indigenously, but which can be manufactured in India as import substitution. The use case is product support of weapon systems and equipment already held by the Services. 6

Manufacture under Make-III is either in collaboration with, or with Transfer of Technology (ToT) from, foreign Original Equipment Manufacturers (OEMs). This is the one sub-category where the product itself is not an indigenous design. 6

After successful development, equipment under Make-III with a minimum of 60 per cent indigenous content is acquired through the Buy (Indian) category, according to MP-IDSA. 6

Make sub-categories under DAP 2020, as described by MP-IDSA
Sub-categoryFundingPurposeSource
Make-IGovernment up to 70% of prototype cost or ₹250 crores per agencyDesign and development by industry6
Make-IINo government fundingIndian vendors' innovative solutions; suo-moto allowed6
Make-IIINot statedImport substitution; foreign OEM collaboration or ToT6
After Make-I/IIAcquired via Buy (IDDM), 50% or more indigenous contentPurchase of successful prototype6
After Make-IIIAcquired via Buy (Indian), 60% or more indigenous contentPurchase of developed product6
MSME earmarkMake-II/III projects up to ₹100 crore per yearReserved for MSMEs6

Prototype to purchase: what happens after development

MP-IDSA states that after successful prototype development under Make-I and Make-II, the indigenously designed and developed equipment, with a minimum of 50 per cent indigenous content, is acquired from the successful Development Agencies through the Buy (IDDM) category. 6

For Buy (IDDM), MP-IDSA's table of indigenous content requirements lists Indian vendors only, with indigenous design and 50 per cent or more indigenous content. The Ministry of Defence booklet says Buy (Indian-IDDM) was introduced in DPP 2016 and is accorded top priority for procurement of capital equipment. 6,3

The booklet reports that in the four financial years from 2016-17 to 2019-20, 86 capital acquisition proposals worth ₹93,727 crore were categorised under Buy (Indian-IDDM). 3

What this means for Indian builders

For a deeptech startup, the first choice is how much of the prototype cost it can carry. Make-I offers government support of up to 70 per cent of prototype cost or ₹250 crores per Development Agency. Make-II offers none, but Startup India says it comes with an assurance of orders on successful development and trials. 6,1

MP-IDSA says projects under Make-II and Make-III with procurement cost not exceeding ₹100 crore per year will be earmarked for MSMEs. It also says entities recognised as startups by the Department for Promotion of Industry and Internal Trade (DPIIT) are eligible to participate in Make-II cases. 6

A Make-II project can begin with the startup itself. MP-IDSA says a suo-moto proposal, even from a single individual or firm, is to be progressed as a Resultant Single Vendor case. Startup India adds that proposals suggested suo-moto by industry are considered, with minimal documentation. 6,1

On intellectual property, the sources provided do not state who owns IP created under Make-I or Make-II, so founders should read the project terms and the DAP text itself. Startups can also look at the other defence routes: iDEX offers up to ₹1.5 crore in grants, and its ADITI sub-scheme offers up to ₹25 crore, according to the Ministry of Defence release of March 24, 2025. 4

That release also says 430 iDEX contracts had been signed as of February 2025, and the Ministry had cleared procurement of 43 items worth over ₹2,400 crore from iDEX startups and MSMEs. 4

Where the demand is: import embargoes and local preference

The 2021 booklet says the Ministry notified a Positive List of 101 items on which imports are embargoed beyond set timelines, and a second list of 108 more items on 31/05/2021. It says the lists include artillery guns, assault rifles, corvettes, sonar systems, radars and other items. 3

The booklet also says the Department of Defence Production notified 46 items under the Public Procurement Order 2017 for which there is local capacity and competition. For those items, only Class-I local suppliers are eligible to bid irrespective of the purchase value. 3

By February 2025, the Ministry reports that five Positive Indigenisation Lists covered over 5,500 items, with more than 3,000 indigenised. It also reports that over 38,000 items are listed on the SRIJAN portal, with more than 14,000 successfully indigenised. 4

Checklist for a startup considering Make-II

  • Get DPIIT recognition first; MP-IDSA says DPIIT-recognised startups are eligible to participate in Make-II cases. 6
  • Check the Positive Indigenisation Lists and SRIJAN portal for items where imports are restricted, as the Ministry of Defence describes them. 4
  • Plan to fund the prototype yourself, since Startup India says no government funding is envisaged under Make-II. 1
  • Design for at least 50 per cent indigenous content, the level MP-IDSA gives for acquisition through Buy (IDDM) after successful development. 6
  • Ask the project owner in writing who holds IP, as the sources provided do not state this.

Questions people ask

How much funding does Make-I provide?

MP-IDSA says Make-I gives government financial support of up to 70 per cent of prototype development cost, reduced from 90 per cent, or a maximum of ₹250 crores per Development Agency. The upper limit may vary in individual cases. 6

Does Make-II give startups any government funding?

No. Startup India says no government funding is envisaged for prototype development under Make-II, but there is assurance of orders on successful development and trials of the prototype. 1

Can a startup start a Make-II project on its own?

Yes. MP-IDSA says solutions offered even by a single individual or a firm as a suo-moto proposal are to be progressed as a Resultant Single Vendor case. Startup India says industry proposals are considered with minimal documentation. 6,1

Who owns the IP in a Make project?

The sources provided do not state this.

Are startups eligible for Make-II?

MP-IDSA says entities recognised as startups by DPIIT are eligible to participate in Make-II cases. 6

Sources

  1. Startup India, Public Procurement (primary source, read 19 November 2026)
  2. Press Information Bureau (Ministry of Defence), Reforms in Defence Sector: Propelling Private Sector Participation (2014-2021), September 2021 (primary source, read 19 November 2026)
  3. Press Information Bureau (Ministry of Defence), Make in India Powers Defence Growth, March 24, 2025 (primary source, read 19 November 2026)
  4. MP-IDSA, Decoding Defence Acquisition Procedure 2020, Amit Cowshish, November 20, 2020 (report, read 19 November 2026)

How this page was made: written with AI from the sources above, read on 19 November 2026. Every figure was checked against the source it cites; lines under "Why it matters" are our view. Editorial standards.

Have a question about deeptech in India? Ask Kriyā: it answers from our dated sources, and the first answers are free.

Ask Kriyā