21 November 2026 • 7 min read
BIS certification is basically voluntary, says the Bureau of Indian Standards (BIS). For some products the Central Government makes compliance with Indian Standards compulsory through Quality Control Orders (QCOs). It does so for reasons such as public interest, safety of the environment and national security. 1
After a QCO takes effect, BIS says, no person shall manufacture, import, distribute, sell, hire, lease, store or exhibit for sale a covered product without the Standard Mark, for example the ISI Mark. The Foreign Trade Policy 2023 adds that domestic rules, technical specifications and safety norms apply to imports as they do to domestic goods, unless specifically exempted. 1,2
For a rocket or aerospace startup, the first question is whether the exact material you import falls under any QCO. The list of products under compulsory certification is on the BIS website. 1
Why it matters (our view)
Confirm first that a QCO actually covers your prepreg, because every exemption route carries conditions that are costly to breach.
Pick the route that matches your business: export, SEZ or domestic sale. Domestic sale of exempt-route goods needs BIS compliance.
Get written confirmation from DGFT or BIS on aerospace-specific questions before shipments arrive.
BIS tells manufacturers to look up the Indian Standard for a product on its Know Your Standards page. If none is found, a query can go to the concerned technical department of BIS. The list of all products under compulsory certification, with the QCOs and their amendments, sits under Conformity Assessment on the BIS website. 1
The Department of Chemicals and Petrochemicals says BIS Standards for the majority of chemicals are voluntary. It says QCOs for 61 Chemicals and Petrochemicals have been notified in the Gazette so far. These sources do not say whether carbon fibre prepreg is among them, so confirm this against the current list. 4
Raw material relief has also moved. A consultancy note dated 17-11-2025 says BIS withdrew QCOs for synthetic fibres and yarns, effective 15 November 2025, and for plastics and polymers in unprocessed and primary forms. It also says upcoming QCOs were deferred till further notice. Verify any such claim against the official notification. 6
Under FTP 2023, inputs imported under an Advance Authorisation without QCO compliance come with a pre-import condition. They must be used in the export product, allowing normal wastage, and exported under the same authorisation. The exemption must be specifically endorsed in the authorisation at the holder's request. Imports without that endorsement must follow the QCOs. 2
Unutilised imports, or products made from them, cannot move to the domestic market even after an export obligation default is regularised. Unutilised material must be destroyed before GST or Customs authorities, or re-exported. It also attracts effective duty on an MFN basis with interest, plus a composition fee equal to 10% of the CIF value of the unutilised inputs. 2
The exemption is for physical exports only, not deemed exports. Clubbing under para 4.36 of the Handbook of Procedures is not available. QCO-exempt imports under the DFIA scheme are not allowed. 2
The Handbook of Procedures says the application is filed online in ANF 4A with the jurisdictional Regional Authority. The same form is used where Standard Input Output Norms (SION) exist, where ad-hoc norms apply, or on a self-declaration basis. If norms are not notified, ANF 4B goes to the concerned Norms Committee in DGFT headquarters. 3
An ad-hoc norm is valid for one authorisation, though the committee can set an extended validity of not more than two years. 3
Where no SION exists, the Regional Authority may issue an authorisation on self-declaration, subject to the Norms Committee's wastage decision. Under the Self-Ratification Scheme, the applicant keeps consumption records for three years from the Export Obligation Discharge Certificate date and a Chartered Engineer certificate is needed. Audit can follow within three years of issue. 3
FTP 2023 exempts EOUs from QCOs issued under the BIS Act, 2016 on inputs required for export production. No DTA clearance of those inputs, or goods made from them, is allowed. The EOU gives an undertaking to Customs and a copy to the Development Commissioner. 2
For SEZs, DGFT Notification No. 20/2026-27 dated 2 June 2026, as reported by Omega QMS, amends para 2.03(A)(iii). The exemption now covers all permissible goods for authorised SEZ operations, including raw materials, components, consumables, spares and capital goods. It applies to both SEZ Units and Developers. 7
Clearance into the DTA is a different matter. FTP 2023 says any removal of such goods, or goods made from them, into the Domestic Tariff Area is subject to QCO, BIS and other applicable rules in force at that time. An undertaking goes to the Development Commissioner at import. 2,7
Indian startups should know about DPIIT orders of 12 February 2026, reported by Lakshmikumaran & Sridharan. For eight named QCOs, Udyam-registered enterprises are exempt if investment in plant and machinery or equipment does not exceed ₹1 crore and turnover for the preceding financial year does not exceed ₹5 crore. The earlier limits were ₹25 lakh and ₹2 crore. The eight QCOs do not include any on carbon fibre or composites. 8
The same DPIIT package gave a 180-day transition window across 26 QCOs for goods dispatched or ordered before a QCO took effect. For dispatched goods, the Bill of Entry must be filed within 180 days after the QCO's implementation date. For goods ordered earlier, both the Bill of Lading and the Bill of Entry must be dated on or before 180 days from that date. If a QCO covers your input, check whether it is on that list. 8
An R&D import exemption exists in the Furniture QCO amendment: up to 200 units a year, only for BIS-certified manufacturers or those who have applied, with no commercial sale and disposal as scrap. It is specific to furniture. The sources describe no equivalent for aerospace materials, so a startup cannot assume one. Importers and dealers need no licence themselves, BIS says, but must source from licence holders. Foreign manufacturers can certify under the Foreign Manufacturers Certification Scheme. 1,8
| Route | Who | Key condition | Source |
|---|---|---|---|
| Advance Authorisation | Exporters | Pre-import; use in export product; endorsement needed | 2 |
| EOU exemption | EOU units | No DTA clearance of inputs or goods | 2 |
| SEZ exemption | SEZ Units, Developers | BIS compliance on DTA clearance | 7 |
| MSME exemption | Udyam firms | Up to ₹1 crore investment, ₹5 crore turnover | 8 |
| 180-day transition | Importers | Bill of Entry within 180 days of QCO date | 8 |
| Furniture R&D import | BIS-certified or applied | Up to 200 units a year; scrap after use | 8 |
BIS licences go to manufacturing units, not importers. BIS grants one after assessing infrastructure, in-process controls, quality controls and testing capability through a visit to the premises. Product conformity is shown by third-party laboratory testing, testing at the premises, or both. 1
Labs recognised by BIS are listed on its LIMS portal, lims.bis.gov.in. The applicant bears the testing cost and pays BIS a fee for processing. A test certificate against an international standard is not accepted in place of a BIS licence for products under the electrical equipment QCO. 1
For licences under Scheme-X, a Technical File must accompany the application, and an application without a complete file may be processed for rejection. Separate applications are needed for each factory location. Licences for the electrical equipment QCO run initially for not less than three years and up to six years. 1
No. BIS says it issues licences only to manufacturing units, not to importers or dealers. They must source covered products only from a manufacturer holding a valid BIS licence. 1
Yes. BIS grants licences to foreign manufacturers under the Foreign Manufacturers Certification Scheme. 1
No. FTP 2023 says unutilised imports, or products made with such inputs, cannot go to the DTA even after a default in export obligation is regularised. 2
BIS says labs recognised for testing are listed on its LIMS portal, lims.bis.gov.in. The applicant pays for product testing. 1
How this page was made: written with AI from the sources above, read on 21 November 2026. Every figure was checked against the source it cites; lines under "Why it matters" are our view. Editorial standards.
Have a question about deeptech in India? Ask Kriyā: it answers from our dated sources, and the first answers are free.
Ask Kriyā